At Tecnor, we believe in challenging the status quo to help build the society of tomorrow. We’re up to take the challenge and help you valorize your ressources. Our values of Integrity, quality and customer experience are pushing our limits to offer you the best solutions. We only accept the best products for you! Thanks to our tireless work, we are proud to be one of the largest compactor distributors with the most complete range in Belgium!

 

Our biggest added value for you is that we offer everything related to compacting from a single source. From the technical design & development to maintenance & service. With more than 50 years of experience, we will be able to accompany you until the very end of your project. You will see that Tecnor offers a complete range of compactors that will answer your need: stationary press, container press, single block, rocker, EPS compactor or liquid separator.

Integrity

We believe in transparency and loyalty

Quality

Our products have an average lifespan of 15 years

Customer experience

We will always put you first to find the solution

Recycling

As mentioned above, Tecnor has the great strength of offering everything you need related to compacting from a single source! We will discuss with you develop the technical design & development and then ensure the maintenance & after-sale service.

The collaboration possibilities are endless! As you will see in our solutions below, we offer a wide range of compactors that will help you sort and compact any kind of material at any kind of volume!

Reliability

Finally, we understand the importance of security and reliability for waste handlers. Thanks to our certified technicians, your employees will receive a schooling on how to use the press and you can rely on quick interventions in case of problem.

It is not surprising that Tecnor has been working for 30 years with Orwak, Husmann and Runi. They are the most reliable brands on the market and will give you the quality and security you deserve!

Our Solutions for you

Vertical and horizontal baler press

Image

Name

Short Description

Useful information

This “combi” press can compact 200-litre metal cones and also make bundles of more conventional materials such as cardboard and plastics.

  • Push: 120 kN (12 t)
  • Capacity: 30 to 50 tons per year
  • Mass of bundles: up to 80 kg.
  • Dimensions (l x p x h): 1.1 x 0.84 x 2.5m

The Power 3320 model has a height of less than 2 m in operation and will still make 200kg bundles (cardboard). It comes with a side-hinged door and will be ideal for use in low-rise ceiling space.

  • Push: 185 kN (18.5 t)
  • Capacity: 50 to 70 tons per year
  • Mass of bundles: up to 200 kg.
  • Dimensions (l x p x h): 1.8 x 1 x 2 m

The Power 3325 will be very suitable for plastic films and cardboard. Similar to the 3420 model however without the automatic sliding door.

  • Push: 260 kN (26 t)
  • Capacity: 50 to 90 tons per year
  • Mass of bundles: up to 400 kg.
  • Dimensions (l x p x h): 1.8 x 1 x 2.4m

The Power 3420: a versatile vertical baler for large quantities of cardboard and plastics, a very fast cycle of only 24 seconds and an automatic sliding door that opens in less than 2 seconds.

  • Push: 260 kN (26 t)
  • Cardboard: 50 to 90 tons per year
  • Plastic: 50 to 130 tons per year
  • Mass of bundles: up to 400 kg.
  • Dimensions (l x p x h): 1.8 x 1 x 2.4m

A powerful vertical ball press for thick and/or resistant cartons. Tight compaction for very dense bales with ideal dimensions for optimal transport.

  • Push: 520 kN (52 t)
  • Capacity: 70 to 130 tons per year
  • Mass of bundles: up to 450 kg.
  • Dimensions (l x p x h): 1.9 x 1 x 2.5m

The Power 3820 features a generous 1500mm-wide cargo opening. It is very fast: a cycle time of only 24 seconds and is also equipped with an automatic sliding door that opens in less than 2 seconds.

  • Push: 260 kN (26 t)
  • Cardboard: 70 to 130 tons per year
  • Mass of bundles: up to 500 kg.
  • Dimensions (l x p x h): 2.1 x 1 x 2.6m
Tecnor | Presse à balles multi-chambres 9020S pour trier vos déchets

The Multi 9020S is the high-capacity baler in the “multi-room” range. Additional rooms can be added to the basic 2-bedroom module.

This bullet press comes standard with a built-in “2-hand” safety device.

  • Push: 200 kN (20 t)
  • Cardboard: 70 to 130 tons per year
  • Plastic: 70 to 130 tons per year
  • Mass of bundles: up to 200 kg.
  • Dimensions (l x p x h): 2.48 x 1.14 x 2.42m
Tecnor | Presse à balles horizontale 350 PET idéale pour PET, carton...

Automatic horizontal baler presses meet the needs of companies and distribution or collection centres whose activity generates large quantities of recyclable materials.

  • Automatic laligarage
  • Automatic start
Tecnor | Presse à balles horizontale automatique pour carton, PET ...

Automatic horizontal baler presses meet the needs of companies and distribution or collection centres whose activity generates large quantities of recyclable materials.

  • Automatic laligarage
  • Automatic start
Stationary press and Tipping Device

Image

Name

Short Description

Useful information

“Classic” stationary presses with central and longitudinal hydraulic jack will preferably be used for small-scale materials

  • Push: 300 kN (30 t)
  • Power kW: 7.5
  • Cycle time: 32 seconds
  • Filling opening (m): 1.4 x 1.5
  • Length: 4.0m

Husmann short stationary presses with cross hydraulic jacks offer a very large filling opening while having a limited total length and are therefore ideal for cardboard.

  • Push: 340 kN (34 t)
  • Power kW: 5.5
  • Cycle time: 43 seconds
  • Filling opening (m): 1.5 x 1.9
  • Length: 2.2m

Similar to the ST-SEL stationary press, this model is more compact but retains an impressive filling opening.

  • Push: 340 kN (34 t)
  • Power kW: 5.5
  • Cycle time: 43 seconds
  • Filling opening (m, L x l): 1.5 x 1.6
  • Length: 2.2m

The hSP screw stationary compactor allows a very strong filling of the compaction box, it is indicated for large pieces of cardboard. It is 100% electric equipment, offered with or without a furnace device.

  • Power kW: 11 – 15
  • Filling opening (m, L x l): 1.2 x 1.5 or 1.5 x 1.5
  • Length: 2.2m

Closed container for mating with stationary press.

Hydraulic rockers for 2 or 4-wheel containers with standard containers depending on various containers. Available in various versions/configurations: stationary, mobile or integrated with compaction equipment.

Roll packer

Image

Name

Short Description

Useful information

The Husmann Gigant 1750 compactor roller is ideal for reducing the volume of bulky waste such as wooden pallets and crates, old furniture, metal boxes and other light metal or bulky waste sets.

  • Total weight: 3,600 kg
  • Roll mass: 1,350 kg
  • Roll width: 1,750 mm

The Gigant GT-M 1750 is the mobile, self-contained version of the Husmann Gignat 1750 compactor roller. It draws its power from a diesel group for both compaction and travel.

  • Total weight: 8,100kg
  • Roller mass: 2,000 kg
  • Roll Width: 1.75m
Portable compactors

Image

Name

Short Description

Useful information

Husmann compaction boxes, also known as “monoblocks” are very durable, require little maintenance, are reliable with a long operational life.

The SPB SEN/SEL series has been developed for dry matter.

  • Power: 5.5kW
  • Power: 380/400V, 50Hz
  • Compression force: 310kN
  • Power height: 1.44m
  • Capacity: 16 to 24 m3
  • Length: 5.6 to 7.2m/ 6 to 7.6m

Husmann compaction boxes, also known as “monoblocks” are very durable, require little maintenance, are reliable with a long operational life.

  • Power: 5.5kW
  • Power: 380/400V, 50Hz
  • Compression force: 310kN
  • Power height: 1.67m
  • Capacity: 16 to 26 m3
  • Length: 5.2 to 7.3m

HSPC-type portable HSPC compactors can be used for different types of materials such as cardboard, plastic films, wooden crates and general waste.

  • Power: 11kW
  • Power: 3 x 380/400V
  • Power height: 1.67m
  • Capacity: 18 to 22 m3
  • Length: 6.2 to 7m
Screw Compactors and liquid separator

Image

Name

Short Description

Useful information

The Runi SK120 is the ideal solution for environmentally conscious supermarkets, home appliance dealers, electronics retailers, and fishmongers and seafood distributors looking to control waste costs.

  • Loading opening: 0.3 x 0.75m
  • Block density: 300 kg/m3
  • Power: 3 x 400/380V, 50Hz
  • Hourly capacity: 18 kg/hour
  • Dimensions (l x p x h): 2.80 x 0.50 x 1.75m

This compactor has a 4 kW engine and a built-in grinder. It is available in two versions: with continuous manual or automatic adjustment (thanks to a hydraulic group) for a regular rate of refrigeration.

  • Loading opening: 0.4 x 0.75m
  • Block density: 300 kg/m3
  • Power: 3 x 400/380V, 50Hz
  • Hourly capacity: 45 kg/hour
  • Dimensions (l x p x h): 2.8 x 0.5 x 1.63m

The SK240 compactor is equipped with a continuous electro-hydraulic control system and will be configured to meet operational requirements.

  • Loading opening: 0.4 x 0.8m
  • Block density: 270 kg/m3
  • Power: 3 x 400/380V, 50Hz
  • Hourly capacity: 75 kg/hour
  • Dimensions (l x p x h): 4.3 x 1.2 x 2.2m

More powerful, greater processing capacity. Many configurations for various materials, a normal pre-shredder or “heavy duty”: the SK 370 screw compactor is a robust equipment designed to process a variety of materials and successful where others must stop.

  • Loading opening: 0.5 x 1/1.2m
  • Block density: 300 kg/m3
  • Power: 3 x 400/380V, 50Hz
  • Hourly capacity: 200 kg/hour
  • Dimensions (l x p x h): 5.4 x 1.35 x 2.3m
Séparateur de liquide Runi SK240 & SK370 pour recyclage

The liquid separation system bursts and compacts the bottles and cans continuously while recovering the liquid phase separately. To avoid the formation of “bridges” in the feeding hopper a special device can be provided as needed.

  • Density: 250 – 600 kg/m3
  • Power: 3 x 400/380V, 50Hz
  • Hourly capacity: 15,000 l/hour
  • Dimensions (l x p x h): 5.9 x 1.35 x 1.93m

Contact us

+32(0)2 253 15 22

Logo photo created by freepik – www.freepik.com // Icons made by Icongeek26 from www.flaticon.com // Icons made by Freepik from www.flaticon.com //  Icons made by Gregor Cresnar from www.flaticon.com // Icons made by Designerz Base from www.flaticon.com